• +91 -9822846488

FOUNDATION ISOLATION SOLUTIONS FOR EQUIPMENT AND MACHINES

 

We are Dealer, Distributor, Supplier of Foundation Vibration Isolation, Vibration Isolation Equipments, Vibration Isolation Materials, Isolation Materials, Fabsorb FAB EPM HP® Foundation Isolation Material, Fabreeka Transformer Mounts. Our setup is situated in Pune, Maharashtra, India.


Delta K™ Low Frequency Pneumatic Isolation System

FAB-EPM material is a polyurethane elastomer specifically designed to provide low frequency vibration isolation for foundation isolation applications.


FAB-EPM material is manufactured in a wide range of types, which allows for optimal loading to achieve increased isolator performance. The damping rate of the different material types is between 7% and 11 %. Additionally, with increased thickness, the
natural frequency is reduced, which also improves isolation. FAB-EPM is impervious to most chemicals, alkaline solutions and oil.


FAB-EPM material can be supplied and used in full sheet form, strips or even blocks. However, when used in full sheet form, the material becomes the base formwork for the concrete foundation. This advantage creates a simple construction method.



Delta K™ Low Frequency Pneumatic Isolation System

Isolation Materials


Fabreeka® Infab TM vibration isolators are composed of a molded elastomer, which has been compounded and designed to offer low frequency isolation and high load capacity.


InfabTM isolation systems have natural frequencies as low as 6.0 Hz and can be designed to exhibit low or high internal damping. lnfab! solutions are used under large concrete foundations supporting heavy machinery, buildings, measuring machines, roller mills and similar equipment.


InfabTM isolators are available in two types to suit a wide range of design options when considering the formwork required to provide proper support during the foundation construction process. InfabTM isolators may be supplied as individual units (blocks) or as isolation panels to facilitate ease of installation.



Delta K™ Low Frequency Pneumatic Isolation System

Fabsorb Foundation Isolation Material

Description
FabsorbTM material absorbs machine-induced energy, limits the transmission of higher frequency disturbances and provides isolation from ambient and induced shock and vibration, which otherwise would affect the accuracy of the machine being installed. Fabsorb material is specifically designed for vibration isolation applications of support foundations for machine tools, shock testing equipment, grinders and similar equipment.

 



Delta K™ Low Frequency Pneumatic Isolation System

FAB EPM HP® Foundation Isolation Material

Description
FAB-EPM HP® material is a mixed cell polyurethane foam specifically designed to provide low frequency vibration isolation for building and machine foundation isolation applications. FAB-EPM HP material is manufactured in different densities, which allows for optimal isolation performance. FAB-EPM HP material is supplied in full sheet form, which becomes the base formwork for a concrete foundation. This advantage creates a simple construction method to reduce overall project cost.

 

Key Features
  • The natural frequency of FAB-EPM HP®is dependent on load and type of material and ranges from 6 Hz to 40 Hz.
  • The damping rate of FAB-EPM HP is 4%- 9% of critical.
  • FAB-EPM HP is impervious to most chemicals, alkaline solutions and oils.
  • FAB-EPM HP is supplied in rolls 1.5M x 5M and in 12.5mm and 25mm thicknesses.


Delta K™ Low Frequency Pneumatic Isolation System

Fabreeka Transformer Mounts to Reduce Structure-Borne Vibration and Noisel

Description
Fabreeka transformer mounts are designed using Fabcel isolation pads to reduce structure-borne vibration and noise transmitted by reactors and transformers. When installed to support this type of equipment, these mounts help to meet OSHA noise pollution standards.

 

Key Features
  • Reduces noise by 3-5 dB
  • Standard sizes support up to 1,300 lbs each. Custom designs/sizes available for all applications.
  • Anti-skid surface prevents equipment “walking”.